RE: 504 Rocker panels

David Herlihy (dherlihy@dc.cdc.org)
Thu, 30 Jul 1998 13:03:33 +0100

Brian- Both sides are rusted up under the aluminum sill plates which
includes the actual face of the panel. They are not completely through, but
they are about to be. The metal in some places is even pulling away from the
body. Do you think the covers can help in this situation? From the looks of
things they have to come out and be replaced. Any ideas on how to solve this
would be of great help.

David

> -----Original Message-----
> From: Brian Holm, Peugeotholm [SMTP:peugeots@plainfield.bypass.com]
> Sent: Thursday, July 30, 1998 7:10 AM
> To: David Herlihy
> Cc: peugeot@padui.org
> Subject: Re: 504 Rocker panels
>
> David
>
> I have some rocker panel covers for 504. Are your sills rusted right up
> under the aluminum sill plates at the door bottoms?
>
> Brian Holm
>
>
> At 11:15 AM 7/28/98 +0100, you wrote:
> >Well I'm back from the wilderness of New Hampshire without the 504. Car
> is
> >running incredibly strongly thanks to all of the input from all on the
> list.
> >I do have one rather large problem typical to all Peugeots, RUST!!!
> >
> >Does anyone know of where I can get pre-fabricated rocker panel for a 75
> >504GLD sedan? Mine are now shot.
> >
> >David Herlihy
> >75' 504GLD
> >
> >
> Brian Holm, Peugeotholm
> Supplying parts for Peugeots only, since 1969
> Plainfield, VT 802.454.7132 Fax 454.1310
> Alternate E-mail: peugeots@together.net