-----Original Message-----
From: Jim Lill [mailto:jpl@vectorbd.com]
Sent: Monday, August 10, 1998 12:18 PM
To: Turbo Mailing List
Subject: Re: Gauges
On Mon, 10 Aug 1998, John Goodyear wrote:
> Just a note on VDO Gauges.
>
> My VDO (-20 to +30 PSI) Gauge needle shakes noisily at 15-16 PSI (Maybe
> higher, Don't Know, Never been there). I have heard Others complain about
> the same thing.
This can usually be fixed by putting a restriction in the feed to
integrate transient pulses.