I did not use their kit. I extended the same silcone hose I used for all
the underhood stuff to the general area. There a tee splits it from the
gauge to the Saab APC sensor which along with the rest of the APC stuff is
in with the EZ200K ECU under the pass footpanel.
On Thu, 21 Jan 1999, Francois Dion wrote:
> I was wondering who had installed a replacement turbo
> guage on their 505 and what model, with what kit.
>
> VDO has two that are a bit more than 2" (dont remember
> precisely) with a black background (white background
> is nice but doesn't fit the 505):
>
> 150 061 (30 vacuum to 15 psi boost)
> and
> 150 121 (30 vacuum to 25 psi boost)
>
> Obviously the first one is sufficient. They also sell
> kits for these: 150 851 to go from the 1/8 - 27 NPT
> (whatever that is) to a 6' nylon hose. Jim, did you
> use that on your car?
>
> Ciao,
> Francois Dion (francois@hyperreal.org)
> --
> Member: FLU #1722, PCNA
> http://www.fortunecity.com/silverstone/zagato/101/launch.html
> Alfa Romeo, Fiat, Lancia, Peugeot, Volvo, Solex
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lill jpl@vectorbd.com
http://www.vectorbd.com/users/jpl
wa2zkd@wb2psi.#wny.usa.na