> Francois Dion wrote:
> > Ok, I got a Saab knock sensor and am going to
> > mount it on the block, next to the original one.
> > What is the thread of these holes? Is the bolt
> > for the Peugeot one a M8x1.25?
>
> Yesterday I finished tightening the exhaust
> manifold, and installed the knock sensor. I
> used a bolt that is M8x1.25 coarse and torqued
> it to 126 lb.in. For reference, the knock sensor
> Bosch part number is 0 261 231 006 (and the
> new Bosch pn is 944 606 145 00).
that 944 # is a Porsche number, check the Bosch x-ref book
>
> As for the APC ECU, I found a used one with
> a 3 months warranty for $150. Is that the
> going rate?
I think $50 for a pick-n-pull is the rate
>
> Ciao,
> Francois Dion (francois@hyperreal.org)
> --
> Member: FLU #1722, PCNA
> http://www.fortunecity.com/silverstone/zagato/101/launch.html
> Alfa Romeo, Fiat, Lancia, Peugeot, Volvo, Solex
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Lill jpl@vectorbd.com
http://www.vectorbd.com/users/jpl
wa2zkd@wb2psi.#wny.usa.na